5 Club Exercises For Shoulders

WRITTEN BY DON GIAFARDINO ON JUNE 25, 2015. POSTED IN FITNESS ARTICLES

Club training is synonymous with shoulder exercise. Just about every club training movement has some degree of shoulder activity involved. If you are interested in packing some muscle on to your delts or increasing your OHP (over head pressing) strength, here are some great club training shoulder exercises.

If you are new to club training, please watch the videos on my website to get the basics down and avoid possible injury.

CLUB 2-HAND OVERHEAD PRESS EXERCISE

Begin with the club held in both hands front, elbows bent 90 degrees and press the club straight up toward the ceiling. Keep it steady by imagining a cup of water balanced on top of the club.

As you press upward wring your hands outward which keeps your elbow tissue safe. Return to starting position while wringing your hands inward. This same move can be done with one hand, but instead of starting on your body’s centerline, begin with the elbow married to your side, club held upright straight in front. Don’t forget to rotate your hand and club outward as it travels upward, and reverse on the way down.

CLUB 45 DEGREE OVERHEAD PRESS EXERCISE

The next is a variation of the overhead press, but instead of pushing the club straight up, make the club travel up and away from your body at a 45 degree angle. Some trainers refer to this as the torch press or angle press. The knob of the club should end up about eye level and the arms are fully extended at an angle up and away from the body. Remember to wring the handle. This also can be done with one hand.

CLUB SHOULDER THREAD EXERCISE

Getting away from the pressing moves, let’s add some strength/mobility to the shoulder exercises. Begin by picking the club from the floor, left hand next to the knob, right hand is under, clean it up to ready position, right elbow married to your side, left arm forearm crossing the abs.

Your two arms should form a square, the club is the corner when you look down. Raise the head or muzzle of the club up and dump it over your right shoulder, ending behind your back. Your elbows should be above your head. The right elbow should be pointing fairly forward while the left is pointing toward the left. Move the club behind your back toward the left and draw it back over your left shoulder into the opposite position that you began in. Return the club to your right side by passing it in front maintaining its upright position. This is an excellent move for building a thick powerful shoulder girdle and directly develops the rotator cuff muscles Supraspinatus, Infraspinatus, Teres Minor, and the Sub-scapularus, easy to remember by SITS. Anatomy lesson – check.

INVERTED CLUB LATERAL RAISE EXERCISE

A shoulder exercise for those who want a bit more deltoid shape is lateral raises with the club held upside-down. Simply grip the knob or the handle and raise the club laterally for medial deltoids, raise to the front for front delts, or bend forward at the waist 45 degrees, drawing the elbows up and to the rear to hit the posterior delts.

CLUB MILL EXERCISE

 The last exercise is a complex and challenging movement for the club training enthusiast. The mill is a shoulder exercise designed to develop strength and coordination. It is similar to throwing a football or cracking a whip. The easiest way to teach this drill is to practice throwing a football but never letting it go. Throw the ball like you were throwing a bomb, but don’t let it go, instead let it return in a downward arc back naturally to the cocked shoulder position.                                                                                                                                                                                                                                                                                  Once you have that down, practice forceful elbow adduction to the body’s centerline. This will cause momentum when using a club and give it a ‘wag’ when performing a mill to help propel it forward and over the shoulder. Once you feel confident, practice more but using a T-ball bat. These are excellent for learning club training patterns. Get in a good hundred on each arm before using a club with any weight. Form is important here, and mills done with a light weight are excellent for joint conditioning and rehab. Mills performed heavier will be a great addition to your shoulder exercises.

BONUS: PRE-WORKOUT CLUB TRAINING WITH BODYTRIBE

Clubwork Club Training Mills

Club Training Side Cast

Club Training Side Swing

The Little Things

 During my first few years of regular weight training, I read articles on heavy lifting and the authors would emphasize on the little things. Most of these concepts fell upon deaf ears with me. There was no time for nuances, training was about moving bigger weights and get stronger - period. Time would prove how wrong that thinking was.


 Fast forward to the present and my love affair with club training. Getting involved with the unconventional fitness scene has netted me some new friends with different ideas. One in particular is Chip Conrad of Bodytribe Fitness. Chip wrote an article that had an impact on me in a way where now the moment of movement is a greater sum than the total reps. It opened up the idea to study the exercise as it is being performed. The little things have now proved to be important.

 Given that the club is a ballistic tool used in multi-planar exercises, little things can make a huge difference. Take the inside mill for example. The mill is probably the first 'flashy' exercise that club enthusiasts want to learn. It is a complex circle whose arc is performed both in front of and behind the body. Needless to say that performing the mill takes a fair amount of skill, and when the club weight is increased, that skill needs to be sharpened.

 The nuance or trick that Chip's article had prompted me to learn was the importance of the position and movement of my elbow. It may not sound like much, but it was the same as someone discovering the perfect foot position for them to squat in. The club weight was able to be increased and form didn't suffer making a good environment for gains.

 A video describing this and other clubwork techniques that will help take your club training to the next level will be available soon. Until then, keep swinging my friends.

Unconventional Athletes Article June/July 2015

 The following is an article from UnconventionalAthletes.com

 There are many reasons to add clubwork to your exercise routine. Shoulder re/pre-hab seems to be the first answer that many club swingers cite. Other answers are increased range of motion, or, they   fit right into my kettle bell workout. Still others say that they enjoy the flow type of ‘katas’ that emulate elaborate sword techniques or doing a yoga session using a club. What ever the reason, it’s all good.

 By now, almost everyone in the fitness game knows about the benefits of clubwork. Increased performance in other areas of training or in the arena are sure signs that the clubs are doing their job. Some fitness enthusiasts train solely with clubwork, and while clubs alone won’t get you to enter a bodybuilding contest, they are  a great addition to shape, define, and harden muscles. With the right programming they will aid a powerlifter’s bench and deadlift. an Oly lifter’s speed, and sprinter’s performance. Fighters such as MMA and boxers have been using clubwork for years, after all it was the first battle training tool.

Humble Beginnings

 Beginning clubwork is exciting and frustrating simultaneously. The desire to copy the complex movements that so many YouTube videos show can drive a newbie into a tizzy. The first rule that must be adhered to is learn  the basics. This cannot be reiterated enough. From picking up and putting down the club to the basic swings, practicing correct form reduces injury!

 The front swing and squat are 2 important base movements. How many of you readers just thought what? Clubwork can be used for legs and this is where we’ll begin.

 The front swing. In clubwork, this is crucial to understand as it is for kettlebells. The front swing is important because that’s how the club will be raised to perform other exercises. Set the club on it’s top or muzzle, handle and knob upward. With your upper back flat and a neutral lower back, like a deadlift when the weight is above the knee, straddle the club so that it’s a bit to the rear past the ankles and grab hold of the handle, arms long, elbows locked then thrust the hips forward extending the torso and opening the knees, maintaining arm lock and flat back, forcing the club to travel up and outward bringing the muzzle to eye level. Remember the arms do not lift, they only act as a pendulum of the force generated by the hip thrust forward. The downward portion is the ‘braking’ to keep the club from hiking backward. As the club falls down, lean the torso forward like a hinge and slightly bend the knee, applying the brakes with glute and hamstring activation making sure that the club doesn’t travel any farther than 45˚ past the legs. Do not let the club hit the ground, this can cause injury. This may require practice for some, but the benefits will be there. When completed with most all clubwork exercises, lower the club as described above, but instead of swinging it upward, use the slight momentum to let the club drift forward until it slows and gently place it on the floor just in front of your feet - it is now ‘parked’. Keep in mind that this is a posterior chain exercise so be sure to engage those muscles and not squat - yet.



 The clubwork squat can vary. The easiest way to learn it is by placing the club on your shoulder much like baseball players resting their bats. Using your front swing, swing the club upward with control and catch it upon the shoulder you wish it to ‘rest’ on. Now, perform a regular squat, torso upright, scapulae pressing downward, neutral low back, weight loaded into the mid foot and heel descending the hips below the knee keeping the shins as upright as possible then drive upward through the mid foot and heels to the starting position. Keep the torso upright and stable and maintain that neutral lower back. As the squats become easier, the next step would be to hold the club upright with the elbows married to the ribs. This is the beginning of learning the front extended squat. Ultimately, the goal is extending the arms completely in front of the torso while squatting.

 These basics are a great place to start learning clubwork, practice them to get a solid foundation for future exercises.

Sore Shoulder? Your Body May Love You For It

 Club training is the one of the best ways to rehab or prehab your shoulders. The whole reason that I got into club training and designed the Adex Club was to get rid of an achy shoulder that had me in pain for a decade. Chiropractors couldn't fix it, other doctors and specialists wanted to operate but with no guarantee.

 My condition was a 'slightly' separated A/C joint and mildly torn rotator cuff muscles. Relying on time to make it better did nothing but increase the pain. At that time, training heavy was my thing so I'd tough it out through bench presses and live with the soreness. after all this is what we do, right? Until I had gotten to the point where a push up wasn't possible because of the pain. A single push up! The search to repair my shoulder now included seeking other ways of treatment.

 While searching the internet looking for relief Google directed me to a man swinging a club. He spoke of the healing benefits of club training and demonstrated some exercises with a light weight 5lb club. I didn't have a club but I did have a loadable dumb bell that I set up with 3lbs on one end. I tried hard to copy the man's patterns and began doing this everyday. Within a month, I was able to not only do a push up but 20.

 Fast forward through the development of the Adex Club, competing at Crossfit events, back to the gym for regular training all while holding jobs that require physical strength that include the shoulder. Cell tower climber, pizza man, crane operator/mechanic, ditch digger, truck driver - all these jobs wouldn't have been possible with a nagging shoulder. Incorporating club training into my regular workouts kept me working out and out working.

 The shoulder is an easy joint to injure, and the repair and rehabilitation can run into tens of thousands of dollars. Club training may be the way to either help heal or help prevent future or further injury, plus the upside of club training is that a full body workout can be accomplished with a few different weight clubs or just one Adex Club. I now use club training as my sole training preference, to do legs, upper body, arms, to stay lean and muscular. Give club training a try for your shoulder and discover what else you can do. Your body may love you for it. Also check into some of the conventional exercises found here by Mark deGrasse.